Blog posts with the category „Data logger“

Continuous, automatic monitoring of our devices (Part 2)

Reading time: 2 Min. | Erik Osse | 24. March 2022

The first part of this blog series was dedicated to the log management software Graylog. We successfully configured the first input via the web interface of Graylog and defined the data transmission of the system log in the MUC.easyplus.
This lay the foundations of this blog post where we demonstrate ...

Data concentrator vs. data logger

Reading time: 1 Min. | Romy Schneider | 10. February 2022

Time and again the terms „data concentrator“ and „data logger“ pop up in the world of Smart Metering. We also use both terms simultaneously for our products. Is there a real difference or are the terms really identical?
We get to the bottom of this question.Data loggers are electronic devices ...

MUC goes Modbus – Read out Modbus TCP meters (Part 3)

Reading time: 2 Min. | Erik Osse | 20. January 2022

In the first two parts the focus was on the introduction of the topic and how data are read out via Modbus RTU.In this third part of this blog series we would like to explain how data are read out via Modbus TCP from meters capable of TCP/IP.To achieve this, our devices act as Modbus TCP Client and use ...

MUC goes Modbus – Read out Modbus RTU meters (Part 2)

Reading time: 2 Min. | Remo Reichel | 28. October 2021

While the first part gave a general introduction to the topic, we would like to describe the parameterization of the interfaces and the configuration of the meters in detail.
Generally, Modbus RTU is operated via an RS-485 interface. The interface is inactive by default. It is activated and parameterized ...

first Page ... 1 2 3 4 5 6 ... last Page